Tag: ISOM

Posted on

ISOM Conversions & IOF Mapping Conference

ICOM 2018 Presentation

Easily convert symbol sets

Convert an existing file

  1. open your source (e.g. ISOM 2010) map
  2. save as with new name
  3. Map > Symbol Set Conversion…
  4. enter the target symbol set
  5. select the relevant crt file (e.g. ISMTBOM 2010)
  6. displayed in left list are source symbols and in right are target symbols
  7. for any unticked source symbols, complete or leave the target symbol
  8. OK
  9. in new map, Select > Select Objects by Symbol > Objects with unknown symbol, to identify symbols that were not converted.
  10. further information http://www.ocad.com/wiki/ocad/en/index.php?title=Symbol_Set_Conversion

Conversions available

Two step conversions

Some conversions such as OSM to MTBO do not have ready made crt files. Using a plain text editor you could create your own crt file perhaps using one of the existing ones as a base.

OSM to MTBO

If using the New Map Wizard to create an MTBO base map, you need to use a 2 stage process as there is no OSM to MTBO crt file.

Create the base map with ISOM 2017 as the target. Then use the Symbol set conversion process to get the base map to ISMTBOM 2017 symbols.
See my post on using the New Map Wizard to create base maps.

International Conference on Orienteering Mapping 2018

Presentations by OCAD Inc Staff

There were two presentations by OCAD Inc staff.

Hubert Klauser’s presentation covered two topics;

  • generalising orienteering maps with TPI contours
  • using the Check Legibility tool

Gian-Reto Schaad’s presentation was on Semi-automatic Extraction of Near-ground Vegetation from Lidar Data

School map symbols

School map from Mapping Commission work group (nice design!)

The IOF Mapping Commission presented their proposals for school orienteering map symbols.

It is interesting to see the variety of symbols currently in use for typical school objects.

Colours for the colour vision impaired

Adrian Uppill was a co-developer of a presentation on Solutions for orienteers with colour vision defects. If the Eureka Orienteers’ permanent orienteering course in Daylesford, VIC completes its funding, Adrian’s work on this topic will be put into practice.

Other presentations

The full list or presentations is at https://orienteering.org/presentations-from-icom-2018/
Videos at https://www.facebook.com/groups/485564718218028/videos/
The videos’ sound quality is poor.

Off the map

Michael Kenna’s magical trees.

Posted on

ISOM 2017 Colour Test

ISOM 2017 digital presss colours

ISOM 2017 colours for digital printISOM 2017 cover

In July 2017, OCAD Inc added their ISOM2017 orienteering map template. When you File > New and select an ISOM 2017  template, you can read in the displayed Map Notes;

ISOM 2017 – International Specification for Orienteering Maps
CMYK color values optimized for digital printing with Heaven Soft paper on Xerox Versant by frey-print & design, CH-Birr. Copyright OCAD AG 2018-01-18

With a continued move to digital print of orienteering maps, OCAD had decided that it was time to explore a CMYK colour range suited specifically to that medium. (Note that templates are still provided with the original colour table which is more suited to offset CMYK printing). In conjunction with leading Swiss O map printer, Frey Print, they  optimised the CMYK colours for Heaven Soft paper printed on a Xerox Versant digital press. Continue reading ISOM 2017 Colour Test

Posted on

Improvements to ISOM 2017 in OCAD

ISOM 2017 cover

ISOM, ISSOM, ISMTBOM, ISSkiOM symbols & colours

Color Swatch
Color Swatch screen

The release of ISOM 2017 symbol templates and colour tables by OCAD Inc has engendered a fair amount of discussion. Mostly to do with why the IOF Mapping Commission decided this or that. However, there have been some queries on the implementation by OCAD Inc.

A few of these resulted in changes that should appear in the next OCAD 12 service update. If you need to be on song now or if you use earlier versions of OCAD, then here are some of those changes. You can thank Michael Wood for his attention to detail and persistence in checking aspects of ISOM 2017 implementation and OCAD inc for their prompt responses.

Note that these changes may well apply to some or all of ISSOM, ISMTBOM, ISSkiOM.

107 Blue colour – earlier ISOMs

In OCAD’s ISOM 2000 colour table, this colour had the overprint ticked which causes it to appear green when overlaid on yellow. ISOM 2017 and other new O ISMs have overprint unticked for the equivalent Blue such as 14 Blue in ISOM 2017. If you have an earlier version of OCAD and are fairly new to orienteering mapping then it may be advisable to check that overprint is unticked for 107 Blue or whatever Blue was used for water line features if you are unsatisfied with how it looks in use.

19 Black colour, ISSOM

This black for passable walls and tramways will change to have overprint turned off. This means it will remain distinct regardless of the colour underneath.

Fence symbol – tags, old OCAD versions

In some much older OCAD versions, the fence symbol tags are the other way. So if converting maps from  those older OCAD conversions, it is advisable to check whether the re-orientation of the tags affects clarity of the map in some situations.

301.004 symbol,  ISOM 2017

This symbol which has a border will now have an accompanying symbol without border. Michael Wood found that there are occasions where a symbol without border is required;

  • where the symbol adjoins an impassable marsh.
  • when exporting part of a map, if the edge of a partial area cuts a lake, it creates an artificial border.
  • converting lakes without border lines to lakes with border lines may end up with two border lines.

Symbol Set conversion tool

And a reminder about my recent post on converting to ISOM 2017.

Aiming off…

Kyneo GNSS project image
Kyneo GNSS project

Build your own GPS receiver and data logger

Kyneo of Spain is the Open Navigation Platform for the GNSS of Things. Your youngster could join an open-source project building on the readily available Arduino system to develop you a portable GPS/Glonass GPS receiver, logger at a reasonable price.

OCAD  mappers who produce recreation & tourism maps

Jon Sutcliffe has just released the new SutMap series of Snowy Mountain Maps. Printed on waterproof stock like all good outdoor maps, the range comprises Kosciuszko, Schlink Pass and  Jajungal. For buskwalkers, mtb riders, skiers, trail runners …

Mark Roberts and Gillian Duncan of Organised Grime now have four outdoor recreation map books for visitors to SE Queensland. The maps are detailed for the use yet uncluttered and are accompanied by useful commentary. We will be taking three next time we visit the area;

Brisbane Valley Rail Trail
Brisbane Valley Rail Trail map book

Over the ditch, Jim Lewis of Jim’s Cartography Services produces recreation and tourism maps of his Taupo region plus specialised maps. And if you need a map graticule (romer in old terminology)  then he is your guy.

Back to Oz where Melbourne’s Andras Bogdanovits of mapstart.com.au has produced the Outdoor Recreation Map Dandenong Ranges. Also check out Andas’ smart searchable online version produced with OCAD.

Yours truly Ken Dowling through Spa Country Explorer offers trail maps of the Wombat Forest (VIC) and environs for mtb riders, bushwalkers and trail runners. On Pretex water proof  stock. The Wombat Station map is soon to be joined by the Dry Diggings map. Free local A4 maps are downloadable.

Free listing for OCAD licenced mappers

Flick me an email info at ocad.com.au with brief details of the mapping services and/or products you provide along with your OCAD licence #. If there is sufficient interest I will get back to you for more info to compile a listing on a new services and product page.  You can have acquired your licence from me or direct from OCAD. No charge.

 

 

 

 

 

 

 

Posted on

Updating to ISOM 2017

ISOM 2017 cover

Having troubles with ISOM 2017 update?

Many mappers are updating archive maps to ISOM 2017 and using ISOM 2017 for 2017 events. Some mappers have experienced issues in converting so this post provides links to useful information. And in Aiming off below, check out Mesa2, a top device for OCAD mapping in the field. Continue reading Updating to ISOM 2017

Posted on

Working collaboratively on OCAD

Could be a great nmtbo area

Three situations for working collaboratively on OCADCollaboration image

The primary reasons I see for using this facility are

  1. collaboration between mapper and course planner
  2. collaboration between multiple mappers of an area
  3. for a major event, monitoring by the mapping co-ordinator of mapper progress and compliance

Continue reading Working collaboratively on OCAD